5712 LONG-HAIR FUR JACKET
See details for work with faux fur at How to use the
CD.
YOU NEED: faux fur, lining, 3 coat hooks.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fur:
1. Back yoke – 1 piece
2. Lower back part – 1 piece
3. Front
yoke – 2 pieces
4. Lower
front part – 2 pieces
5. Sleeve
– 2 pieces
6. Inner
collar – 1 piece
7. Outer
collar – 1 piece
8. Valance
– 2 pieces
Lining:
1. Back yoke – 1 piece
2. Lower back part – 1 piece
3. Front
yoke – 2 pieces
4. Lower
front part – 2 pieces
5. Sleeve
– 2 pieces
6. Upper
sacking – 2 pieces
7. Lower sacking
– 2 pieces
NB: when cutting lining front yoke/lower
front, do not take into account front bands width.
INSTRUCTIONS:
1. Stitch the valance to lower
sacking. Lay the sacking with the valance on back part’s right side, lay lower
sacking’s right side on front part, then stitch. Fold the seam out and
topstitch on the sacking.
2. Stitch back
yoke to lower back part.
3. Stitch front
yoke to lower front parts.
4. Stitch shoulder edges.
5. Lay collars right sides together and overstitch them along
corners/collar fall. Turn the collar right side out. Tack the collar into the neckline.
6. Stitch sleeves into armholes.
7. Stitch sleeve edge/side edge with sackings with one seam.
8. Do the same to stitch lining pieces together: stitch the yoke to back
part, stitch front yoke to front part. Stitch side/sleeve seams leaving a hole
in sleeve front right seam (to turn the garment right side out). Stitch
shoulder edges at 5 cm distance from armhole edges. Stitch front part
lining to front band edges. Stitch shoulder seams to the end. Stitch sleeves
into armholes.
9. Lay the lining and
front bands on the garment right sides together, then overstitch the neckline.
Stitch front bands’ lower edges to front parts as marked on the hem. Cut seams
in front edgings’ lower corners.
10. Stitch the lining
to garment/sleeve hems. Turn the jacket right side out through sleeve hole.
Stitch hole edges together.
11. Sew hooks under right front edging. Lay right front part on left front part coinciding middle lines, then mark loop places. Sew loops to left front edging.