You need:
natural/mixed fabric suitable for costumes, natural/faux leather; fusing, 4
buttons.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1.5 cm
for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Back part 2
pieces
2. Front part 2
pieces
3. Front sleeve 2
pieces
4. Back sleeve 2
pieces
5. Collar 1 piece
Leather:
1. Back part 2
pieces
2. Front part 2
pieces
3. Front sleeve 2
pieces
4. Back sleeve 2
pieces
5. Collar 1 piece
Fusing: collar and
fabric front parts.
INSTRUCTIONS:
1. Apply the fusing
to wrong side of collar and fabric front parts.
2. Lay collars right
sides together and overstitch along ends and collar fall; begin/finish stitch
at marked line of collar stitching. Cut seam allowances in corners, turn the
collar right side out, then press.
3. Processing leather
pieces. Stitch back middle seam. Lay seam allowances apart, then topstitch.
Stitch back sleeve to back part. Lay seam allowances apart, then topstitch.
Stitch front sleeve to front part. Lay seam allowances apart, then topstitch.
Stitch shoulder edges. Lay seam allowances apart, then topstitch.
4. Processing fabric
pieces. Press middle back seam. Press seam allowances apart. Stitch back sleeve
to back part. Press seam allowances apart. Stitch front sleeve to front part.
Press seam allowances apart. Stitch shoulder edges. Press seam allowances
apart.
5. Lay mantles right
sides together, then overstitch front edging and lapel up to the mark of collar
stitching. Slash rounded allowances, cut corners.
6. Insert the collar
between mantles. Stitch fabric collar into neckline of leather mantle, stitch
leather collar into neckline of fabric mantle. Slash rounded allowances, then
press the seam apart.
7. Overstitch the hem
excluding a hole to turn the garment right side out. Turn the mantle right side
out, than press. Make a stitch precisely along the seam joining the collar and
the neckline.
8. Make double
decorative stitch along front edging/lapel/hem/collar ends and collar fall at
0.2 cm and 1 cm from the edge stitching technological hole at the same time.
9. Make buttonholes
into right front part, sew buttons to left front part.