YOU NEED: natural/mixed fabric; fusing; blind zipper.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Center part – 2 pieces
2. Side part – 4 pieces
3. Yoke – 4 pieces
4. Flounce – 2 pieces
Fusing:
1. Yoke – 2 pieces
INSTRUCTIONS:
1. Apply the fusing to wrong side of the yoke.
2. Stitch center part to side part. Neaten seams and press them toward the center.
3. Stitch straightened yoke to the skirt. Neaten seams and press them upward.
4. Stitch skirt right seam and neaten it. Press the seam backward.
Stitch left side seam between closure mark and the hem pressing closure allowance, then neaten the seam. Lay the zipper under allowances with its teeth hidden.
5. Stitch flounces together. Neaten seams and press them. Stitch the flounce to skirt hem. Neaten the seam and press it upward. Neaten flounce’s lower edge, fold it 1 cm under and topstitch. Press the seam.
6. Stitch yokes without fusing along right side seam. Neaten joining sea as well as open side edges and yokes’ lower edges. Press seams. Lay the skirt and inner yokes right sides together and overstitch them along upper edge. Topstitch the overstitching on inner yoke at 0.2 cm from the seam. Fold inner yokes into wrong side and press them. Stitch side open edges to zipper allowances. Topstitch inner yokes along the seam joining outer yokes, then press.