YOU NEED: artificial sheepskin; lining; 1 separable
zipper; 2 zippers for pockets.
IF THE PATTERNS HAVE DOUBLE CONTOUR,
THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2.5 cm for hem, 2
cm for oval yoke, 0 cm for sleeve hems.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back part – 1 piece
2. Front
part – 2 pieces
3. Oval
yoke – 2 pieces
4. Hood –
2 pieces
5. Center
hood – 1 piece
6. Front
sleeve – 2 pieces
7. Middle
sleeve – 2 pieces
8. Lower
sleeve – 2 pieces
9. Hood facing – 1 piece
Lining:
1. Upper pocket small lining – 2 pieces
2. Upper pocket big lining – 2 pieces
INSTRUCTIONS:
1. Mark oval yoke place on front part. Lay the yoke under front part and topstitch.
2. Mark pocket place on oval
yoke. Cut a slit along pocket entrance, make diagonal slits at 1-1.5 cm from
pocket ends. Lay the zipper under pocket entrance edges so that zipper teeth
are visible. Topstitch pocket entrance at 0.2 cm from edge. Stitch upper pocket
big/small linings. Stitch pocket lining and neaten it.
3. Stitch hood center to
hood (with seams on right side). Lay hood facing on hood right sides together
and overstitch.
4. Stitch sleeve parts (with
seams on right side).
5. Stitch shoulder edges
(with seams on right side). Stitch sleeves into open armholes. Topstitch seams
joining sleeves. Stitch sleeve hem and garment side edges with one seam.
6. Stitch the hood into
neckline (with the seam on right side).
7. Cut artificial leather
stripe of 4 cm width and the length equal to zipper length. Lay the stripe on
front part right side together, inserting the zipper between them. Overstitch
edging with stripe and fold it into wrong side. Cut overstitching to 0.2-0.3 cm
to reduce edge overstitching thickness. Fold stripe free edge to 1 cm into
wrong side. Make decorative stitch along edging, catching the stripe. Fold hem
into right side and topstitch. Fold hood facing into right side and topstitch.