YOU NEED: denim; fusing; clasp; eyelets; studs.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for the hem.
NB!
Before sewing, print paper patterns and lay them out according to the linen
width (from 90 to 150 cm) to find out how much material you need (do not forget
about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Center front
part – 2 pieces
2. Middle front
part – 2 pieces
3. Side front part
– 2 pieced
4. Center front
part – 2 pieces
5. Side back part
– 2 pieces
6. Front strap – 4
pieces
7. Strap – 4 pieces
8. Flap – 4 pieces
9. Upper facing –
2 pieces
Fusing: flaps; one-piece front bands.
INSTRUCTIONS:
1. Apply the fusing to wrong side of flaps and
one-piece front bands.
2. Stitch center front part to middle front part right
sides together. Press seams towards the center and topstitch. Stitch side front
part to middle front part right sides together. Press seams toward the middle
and topstitch. Stitch side front part to middle front part right sides
together. Press seams towrads the middle and topstitch them.
3. Stitch back middle edge, press the seam leftward
and topstitch. Stitch center back part to middle back part right sides
together. Press seams toward the center and topstitch.
4. Stitch top’s side edges. Press seams backward and
topstitch.
5. Lay flaps right sides together and overstitch. Turn
the flap right side out. Slash corners. Topstitch
along contour at 0.1 cm and 0.5 cm from edge.
6. Lay
straps right sides together, then overstitch. Turn the strap right side out,
slash corners. Topstitch strap’s contour at 0.1 cm and 0.5 cm from edge. Make
eyelets into straps.
7. Lay
front straps right sides together, then overstitch. Turn front strap right side
out, slash corners. Topstitch at 0.1 cm and 0.5 cm from three edges. Turn front
strap’s upper part into wrong side inserting the clasp. Topstitch with triple
stitch.
8. Lay upper facing right sides together, overstitch
along three edges inserting the strap and strap’s upper part. Turn upper facing
right side out, slash corners.
9. Apply the fusing to wrong side of front bands. Neaten
top’s hem and front bands along free edges. Fold front band into right side,
overstitch lower corner and turn it wrong side out.
10. Stitch inner part of upper facing. Fold outer
facing’s edge under and topstitch along the seam joining the facing inserting
flaps.
11. Press the hem into wrong side and topstitch.