7106 ¾ PANTS (SET)

YOU NEED: natural/mixed fabric; fusing; 1 zipper; 1 button; elastic braid (waistband’s pattern is developed for 3 cm width). NB! Fabric and trimming handles must combine.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCE: 1 cm for all seams, 3 cm for hems.

NB! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Waistband – 1 piece

2. Yoke – 2 pieces

3. Upper back part – 2 pieces

4. Lower back part – 2 pieces

5. Upper front part – 2 pieces

6. Lower front part – 2 pieces

7. Back pocket – 2 pieces

8. Side sacking – 2 pieces

9. Side front part – 2 pieces

10. Belt loop – 12 pieces

11. Button catch – 1 piece

Fusing: front waistband, button catch, pocket entrance’s allowance.

INSTRUCTIONS:

1. Apply the fusing to wrong side out front waistband, button catch, pocket entrance’s allowance.

2. Neaten back pocket along the contour. Press upper edge of back patch pocket into wrong side, fold it under and topstitch. Press pocket’s lower/side edges into wrong side (according to the pattern). Topstitch the pocket on upper back part according to marks.

3. Stitch side sacking on upper front part. Fold the sacking into wrong side, slash the seam and fix with a stitch at 0.1 cm from the edge.

4. Lay front pocket’s side under upper front part, stitch the sacking and neaten the seam. Fix the pocket along upper/side edges.

5. Stitch the yoke to back part. Neaten joining seam and press it towards the yoke. Topstitch at 0.5 cm from joining seam.

6. Stitch upper back parts to lower back parts. Press seams upwards and topstitch along seams.

7. Neaten front/middle edges of trousers as well as hems. Stitch inseams and neaten them, press them backwards. Stitch side seams, press them apart and neaten. Stitch front/middle edges up to closure clit. Make another stitch along crotch seam close to stitch joining front/middle seams.

8. Press closure one-piece facing into wrong side. Stitch the zipper under closure left edge. Stitch zipper free braid to right one-piece facing. Fold button catch along the center and overstitch short lower edge. Topstitch closure one-piece facing on button catch on left edge. Topstitch slit’s right edge catching the facing.

9. Fold belt loop wrong side out, overstitch. Turn belt loop right side out, make a stitch of 0.1-0.2 cm width and press it.

10. Press the waistband along the enter right side out and neaten lower inner edge.

11. Stitch the waistband to pants’ upper edge. Lay elastic braid on the waistband at back part’s level. The braid must overlap side seams by 1 cm. Make fixing stitch at side seams’ level (make facultative stitch to fix the zipper at waistband’s middle). Overstitch waistband’s ends, cut corners’ allowances and turn the detail right side out. Topstitch waistband’s lower neatened edge along joining seam and press ready waistband. Topstitch belt loops’ shaped edges on the seam joining the waistband. Fold upper edge under and topstitch on waistband’s upper edge.

12. Press hems into wrong side and topstitch.

13. Make a buttonhole into waistband’s right edge, sew a button on left one. Press pants.