YOU NEED: natural/mixed fabric. NB! Fabric and trimming handles must combine.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for garment hem, 0 cm for
front/band armholes and front/back neckline.
NB!
Before sewing, print paper patterns and lay them out according to the linen
width (from 90 to 150 cm) to find out how much material you need (do not forget
about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back part – 2
pieces
2. Front part – 1
piece
3. Front yoke – 1
piece
INSTRUCTIONS:
1. Cut
trimming for front/back parts and armholes at 45 degrees to beam/shoot threads.
The stripe can be of several pieces. Fold the stripe wrong side out and stitch
(the seam goes on beam threads). Press the seam apart.
2.
Stitch the yoke to front part slashing front part’s corners. Neaten the seam
joining the yoke and press it.
3. Stitch side seams and neaten them. Press seams backwards. Stitch middle back seam and neaten it; press the seam.
4. Trim
front/back necklines with the piping. Lay the stripe on neckline right sides
together, adjust edges and stitch together. Press stripe’s edge into wrong
side. Fold the stripe into wrong side and topstitch pressed edge on the seam
joining the stripe.
5. Trim
front/back armholes with the stripe (in the same way as necklines) leaving long
ties for straps at both sides.
6.
Neaten top’s hem at right side, fold into wrong side and topstitch. Press top’s
hem.