YOU NEED: denim; fusing; zipper; 1
button; elastic braid of 3 c, width.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for the hem.
NB!
Before sewing, print paper patterns and lay them out according to the linen
width (from 90 to 150 cm) to find out how much material you need (do not forget
about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1.
Waistband – 1 piece
2. Front
skirt – 2 pieces
3. Back
skirt – 2 pieces
4. Side front skirt – 2
pieces
5. Yoke – 2 pieces
6. Back pocket – 2 pieces
7. Belt loops – 1 piece
8. Button fly – 1 piece
9. Side sacking – 2 pieces
Fusing: front
waistband, button fly.
INSTRUCTIONS:
1. Apply the fusing to wrong
side of front waistband and front fly.
2. Neaten vent’s edge of side front skirt.
Fold allowances into wrong side and topstitch. Neaten vent’s edge of front
skirt. Stitch front skirt’s relieve down to the vent. Neaten the seam. Press
the relieve and the vent. Topstitch right side at 45 degrees angle.
3. Lay the sacking
on front skirt right sides together and overstitch pocket entrance. Topstitch
pocket entrance at 0.1 cm and 0.5 cm from the edge. Lay side front part under
front skirt according to side marks determining pocket entrance. Stitch the
sacking and neaten it. Fix the pocket at upper/side edges if front skirt.
4. Stitch
the yoke to back skirts and neaten it. Press seams towards the yoke. Topstitch at 0.1 cm and 0.5 cm.
5. Neaten back pocket along the contour. Fold upper
edge under and topstitch. Press pocket’s side/lower edges under. Topstitch back pocket on back skirt at 0.1 cm and 0.5 cm.
6.
Stitch middle back edge. Neaten middle back seam, press it and topstitch.
7. Neaten middle front edge. Stitch
middle front edge between the hem and closure notch, then press.
8. Press closure on-piece facing
into wrong side. Stitch the zipper under left slit edge. Stitch
zipper’s free braid to right edge to one-piece facing. Fold the button catch
along the center and overstitch along both edges. Turn the button catch right
side out and press it, neaten detail’s side edge. Stitch the button catch to
zipper’s left allowance. Topstitch slit’s right edge catching the facing.
9.
Stitch side seams, neaten them and press.
10.
Fold the belt loop along the center wrong side out, adjust edges and overstitch
it at 0.5-0.7 cm from edges. Turn the detail right side out, place the seam on
bending or make edging of 0.1-0.2 cm width into wrong side, then press it.
11.
Press the waistband along the center right side out. Neaten waistband’s lower
edge. Cut elastic braid according to size and topstitch to waistband (between
side seams). Stitch waistband’s raw edge to the skirt. Overstitch waistband’s
ends. Slash extra fabric and turn ends right sides out. Topstitch neatened edge
along the seam joining the waistband. Cut belt loops according to size and
topstitch them on waistband’s upper edge.
12. Neaten the hem, fold it into wrong side,
overstitch vents’ corners and make decorative stitches. Neaten the buttonhole
into the waistband. Sew the button.